Mitigating PCR-mediated recombination artifacts

Seeing alleles in your Genotyping Analysis results that combine mutations from two of your expected alleles? They may not be real genotypes. PCR can recombine two templates together into hybrid molecules, and this guide shows you how to spot those artifacts and set up your amplicon PCR so they don’t appear in the first place.

PS 0010 E PCR mediated Recombination

What is recombination?

Recombination happens during multi-template PCR amplification when incomplete polymerase extension products from one template anneal to a different, homologous template in subsequent PCR cycles, creating chimeric (hybrid) molecules (Kalle et al., 2014). This phenomenon, sometimes called ‘template switching,’ can compromise haplotype phasing, as artifactual recombination misrepresents the true allelic combinations on a given chromosome (Shafikhani, 2002).

https://plasmid-saurus.transforms.svdcdn.com/production/Resource-Center/Tech-Notes/PS-0010-E-TechNote_Amplicon_pcr-mediated-recombination-artifacts/Recombination_SonalFormatted.png?w=1482&h=949&auto=compress%2Cformat&fit=crop&dm=1788200705&s=e0f02ceaefedf0afc1cca8951e1a34c2

This technical note describes how PCR-mediated recombination appears in Genotyping Analysis results, reports optimization experiments testing polymerase, template concentration, and cycle number, and recommends conditions that, in our hands, reduced recombination to an undetectable level.

How to spot recombination in your results

Since there are instances where multiple alleles exist, like polyploidy, our system does not flag recombined chimeras as artifacts, it simply reports their fraction of the population like a normal allele.

https://plasmid-saurus.transforms.svdcdn.com/production/Resource-Center/Tech-Notes/PS-0010-E-TechNote_Amplicon_pcr-mediated-recombination-artifacts/Recombination_Examples.png?w=1657&h=844&auto=compress%2Cformat&fit=crop&dm=1788200706&s=dc2ac78e8eab96f12f5bf6b09c882f55

In very simple cases, it may be easy to identify this chimeric population as a low level artifact, allowing interpretation of the sample’s true genotype. For instance, when analyzing a diploid sample with two known and expected alleles, the recombined alleles might easily be ruled out as artifacts. However, in other cases, identifying recombination may not be as straightforward. In the case of polyploid analysis, ruling out chimeras by logic can be difficult. If you see evidence of chimerism in your results or are worried about how it may affect the interpretation of your results, read on to learn about approaches to mitigate this risk.

 

What can I do to prevent recombination?

The underlying mechanisms of PCR-mediated recombination are well-documented (Kalle et al., 2014), providing researchers with established strategies to control its frequency during amplification (Lahr & Katz, 2009).

The most important factor for minimizing recombination is to choose a polymerase with high processivity. Processivity is dictated by the intrinsic properties of the enzyme, and different polymerases possess unique template-binding mechanisms and dissociation rate constants that influence how many nucleotides are added before it falls off the template. Processivity can also be influenced by the components of the reaction such as nucleotide concentration and choice of buffer, as well as the specific composition of nucleotides on the DNA template sequence (Kalle et al., 2014).

To help our customers find ideal PCR conditions to minimize recombination, we performed a series of optimization experiments to reduce recombination to an undetectable level in our hands.

We performed the optimization using a sample of known allelic composition, made up of a 50/50 mixture of allelic sequences, 1.6 kb in length, that differ by two mutations. We then prepared PCR amplicons varying the polymerase, template concentration, and number of PCR cycles. Then, we sequenced the amplicons and summed the percentage of recombined chimeras reported in each sample. For example, this sample contained 18% of both chimeric sequences, so the reported recombination frequency would be 36%. 
 

https://plasmid-saurus.transforms.svdcdn.com/production/Resource-Center/Tech-Notes/PS-0010-E-TechNote_Amplicon_pcr-mediated-recombination-artifacts/Recombination-Rate-Example.png?w=1775&h=225&auto=compress%2Cformat&fit=crop&dm=1788200705&s=9982ef9de83326a9a798a39d3e894668

 

Outcomes of Plasmidsaurus’s Genotyping Analysis PCR optimization 

As expected, the choice of polymerase had the biggest impact on recombination rate. We tested a few commercial polymerases (not shown) well known for high processivity, and contrasted them with a polymerase known to have a high recombination rate, Taq (Shafikhani, 2002). We found that the Takara PrimeSTAR GXL Polymerase was best for minimizing recombination in our hands. 

https://plasmid-saurus.transforms.svdcdn.com/production/Resource-Center/Tech-Notes/PS-0010-E-TechNote_Amplicon_pcr-mediated-recombination-artifacts/Chimerism_polymerase_comparison.png?w=2084&h=784&auto=compress%2Cformat&fit=crop&dm=1788200705&s=17683df9d95ef2e3c87f8d9ede144078

We also found starting template concentration and number of PCR cycles to be important factors. We monitored PrimeSTAR GXL reaction progress using qPCR, and sequenced samples removed at 15, 25, 30, and 35 cycles.  

https://plasmid-saurus.transforms.svdcdn.com/production/Resource-Center/Tech-Notes/PS-0010-E-TechNote_Amplicon_pcr-mediated-recombination-artifacts/Chimerism_qPCR_recombinationrate.png?w=2266&h=783&auto=compress%2Cformat&fit=crop&dm=1788200705&s=3412c772848b31b2e7cc47f28560b161

Recombination appears to lag behind the qPCR sigmoid curve. This is perhaps because as the reaction progresses and dNTPs are depleted, polymerase stalling and template dissociation occur more frequently, leading to more PCR fragments. We noticed that the best condition that led to undetectable recombination falls before the qPCR sigmoid curve inflection point, while dNTPs and primers are still abundant. However, once all resources have been fully consumed, the rate of recombination stays constant for the remainder of the cycles (because amplification has ended).

  • The conditions that led to undetectable recombination for the 1.6 kb amplicon were:
  • 0.1 ng template
  • PrimeSTAR GXL Premix (2X master mix)
  • PrimeSTAR GXL protocol for ≤10 kb products:
    • 98 °C 10 s
    • 55 °C 15 s
    • 68 °C 1 min/kb
    • Repeat 15 cycles

 

Summary

PCR-mediated recombination can make genotype interpretation more complicated, especially when multiple alleles are present. Fortunately, optimizing your PCR conditions can substantially reduce the formation of chimeric sequences.

In our experiments, combining a high-processivity polymerase, low template input, and fewer PCR cycles reduced recombination to undetectable levels while still producing amplicons suitable for sequencing.

These conditions are a useful starting point, but they aren't one-size-fits-all. Different amplicons may require adjustments to template concentration, extension time, or cycle number to balance yield and recombination.

If you suspect recombination in your Genotyping Analysis results, consider repeating your PCR with optimized conditions and comparing the resulting allele populations. Reducing PCR-generated chimeras can help you distinguish true alleles from amplification artifacts and interpret your genotypes with greater confidence. 

References

Kalle, E., Kubista, M. & Rensing, C. Multi-template polymerase chain reaction. Biomol. Detect. Quantif. 2: 11–29 (2014). doi: 10.1016/j.bdq.2014.11.002

Lahr, D.J.G. & Katz, L.A. Reducing the impact of PCR-mediated recombination in molecular evolution and environmental studies using a new-generation high-fidelity DNA polymerase. BioTechniques 47: 857–866 (2009). doi: 10.2144/000113219

Shafikhani, S. Factors affecting PCR-mediated recombination. Environ. Microbiol. 4: 482–486 (2002). doi: 10.1046/j.1462-2920.2002.00326.x

Takara Bio. PrimeSTAR GXL Premix. Takara Bio (accessed 31 August 2026). https://www.takarabio.com/products/pcr/pcr-master-mixes/complex-templates/primestar-gxl-premix

Document ID PS-0010-E
Version v1.1
Published Sept. 2, 2026
Last revised Nov. 10, 2026